For Dodge Ram 2003 - 2008 1500 2500 3500 4WD 4X4 Steering Gear Box Stabilizer Bar
Buy from Maxpeeding Rods
$58
Overview
Application: 2003 - 2008 for Dodge RAM 1500 2500 3500 4X4 4WD 5.7L / 5.9L / 6.7L / 8.0L Will NOT fit trucks with updated 2009+ gearbox installed. 2006 - 2008 for Dodge RAM 1500 MEGACAP 4x4 ONLY 2003 - 2008 for Dodge RAM 2500 5.7L 345CU. IN. V8 OHV 2006 - 2008 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C" 2005 - 2005 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6" 2003 - 2004 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6, 7" 2007 - 2008 for Dodge RAM 2500 6.7L 408CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "A" 2003 - 2003 for Dodge RAM 2500 8.0L 7990CC 488CU. IN. V10 OHV VIN CODE "W" 2003 - 2008 for Dodge RAM 3500 5.7L 345CU. IN. V8 OHV 2006 - 2008 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C" 2005 - 2005 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6" 2003 - 2004 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6, 7" 2007 - 2008 for Dodge RAM 3500 6.7L 408CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "A" 2003 - 2003 for Dodge RAM 3500 8.0L 7990CC 488CU. IN. V10 OHV VIN CODE "W" * NOT fit 2WD Model * NOT fit RAM Power Wagon * For vehicle with OEM Factory steering box ONLY * If your truck has had an upgraded box installed by your for Dodge dealer, it will likely have the 1-1/4" main shaft instead of the factory installed 7/8" shaft on the 03-08 for Dodge 2500/3500 4WD Rams. If so, this kit will not fit your truck. Specification: Package Includes: 1PC WELDED STABILIZER ASSEMBLY 1PC UCFL205-16 FLANGED BEARING 1PC SECTOR NUT 4PC M10 x 40 HEX HEAD BOLT (STABILIZER MOUNT) 4PC M10 LOCK WASHER 4PC M10 WASHER 2PC 7/16"-14 x 1.5" HEX HEAD BOLT (BEARING MOUNT) 2PC 7/16" LOCK NUT 4PC 7/16" WASHER 1PC 7/8" LOCK WASHER Condition: 100% brand new in box Warranty: 2 years for any manufacturing defect Featrue: - Made by high strength steel and durable Powder-Coated Finish - Improved suspension geometry to reduce bump steer - Improves Rear Suspension, Handling, Predictable Response and even Prevents Premature Tire Wearing. - Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life - Perfect for track cars, drift control, street course, off road - Direct bolt-on for OE factory or replacement - Professional Installer is Highly Recommended (No Instruction Included) - Alignment Highly Recommended After Install Warranty: We aim to provide you the good buying experience, 30 days return policy is offered in our store. Please follow our return policy before you return any item(s): If you are unhappy with your purchase for any reason, you can return it to us in an unused condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage costs. Please note you MUST contact us to obtain a Return Authorization and Return Address before returning any part. Any parcel without the Return Authorization will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization. Important Notice: 1. Any returned item(s) without Return authorization will be rejected. 2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible 4. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, the updated result will be informed. If you have made a mistake on purchase and wish to cancel the order before it is dispatched please contact us by email as quickly as possible. Shipping: 1. We will ship your order in one business day once the payment is cleared. 2. Tracking number will be uploaded to your MXR customer account within 24 hours after shipment. Meanwhile, you will get the logistics notification mail. 3. Shipping time usually takes 3-7 business days when products available in local warehouses, and 5-25 business days to International addresses. 4. We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal.
Overview
Application: 2003 - 2008 for Dodge RAM 1500 2500 3500 4X4 4WD 5.7L / 5.9L / 6.7L / 8.0L Will NOT fit trucks with updated 2009+ gearbox installed. 2006 - 2008 for Dodge RAM 1500 MEGACAP 4x4 ONLY 2003 - 2008 for Dodge RAM 2500 5.7L 345CU. IN. V8 OHV 2006 - 2008 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C" 2005 - 2005 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6" 2003 - 2004 for Dodge RAM 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6, 7" 2007 - 2008 for Dodge RAM 2500 6.7L 408CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "A" 2003 - 2003 for Dodge RAM 2500 8.0L 7990CC 488CU. IN. V10 OHV VIN CODE "W" 2003 - 2008 for Dodge RAM 3500 5.7L 345CU. IN. V8 OHV 2006 - 2008 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C" 2005 - 2005 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6" 2003 - 2004 for Dodge RAM 3500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "C, 6, 7" 2007 - 2008 for Dodge RAM 3500 6.7L 408CU. IN. L6 DIESEL OHV TURBOCHARGED VIN CODE "A" 2003 - 2003 for Dodge RAM 3500 8.0L 7990CC 488CU. IN. V10 OHV VIN CODE "W" * NOT fit 2WD Model * NOT fit RAM Power Wagon * For vehicle with OEM Factory steering box ONLY * If your truck has had an upgraded box installed by your for Dodge dealer, it will likely have the 1-1/4" main shaft instead of the factory installed 7/8" shaft on the 03-08 for Dodge 2500/3500 4WD Rams. If so, this kit will not fit your truck. Specification: Package Includes: 1PC WELDED STABILIZER ASSEMBLY 1PC UCFL205-16 FLANGED BEARING 1PC SECTOR NUT 4PC M10 x 40 HEX HEAD BOLT (STABILIZER MOUNT) 4PC M10 LOCK WASHER 4PC M10 WASHER 2PC 7/16"-14 x 1.5" HEX HEAD BOLT (BEARING MOUNT) 2PC 7/16" LOCK NUT 4PC 7/16" WASHER 1PC 7/8" LOCK WASHER Condition: 100% brand new in box Warranty: 2 years for any manufacturing defect Featrue: - Made by high strength steel and durable Powder-Coated Finish - Improved suspension geometry to reduce bump steer - Improves Rear Suspension, Handling, Predictable Response and even Prevents Premature Tire Wearing. - Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life - Perfect for track cars, drift control, street course, off road - Direct bolt-on for OE factory or replacement - Professional Installer is Highly Recommended (No Instruction Included) - Alignment Highly Recommended After Install Warranty: We aim to provide you the good buying experience, 30 days return policy is offered in our store. Please follow our return policy before you return any item(s): If you are unhappy with your purchase for any reason, you can return it to us in an unused condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage costs. Please note you MUST contact us to obtain a Return Authorization and Return Address before returning any part. Any parcel without the Return Authorization will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization. Important Notice: 1. Any returned item(s) without Return authorization will be rejected. 2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped 3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible 4. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, the updated result will be informed. If you have made a mistake on purchase and wish to cancel the order before it is dispatched please contact us by email as quickly as possible. Shipping: 1. We will ship your order in one business day once the payment is cleared. 2. Tracking number will be uploaded to your MXR customer account within 24 hours after shipment. Meanwhile, you will get the logistics notification mail. 3. Shipping time usually takes 3-7 business days when products available in local warehouses, and 5-25 business days to International addresses. 4. We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal.